Use of micropipettes

Never touch the tip with your fingers, as this poses a contamination risk. After the liquid at the tip moves into the vacuum, it can then be transported and released into another container as needed.

For smaller volumes you may also need to hold the tip against the side of the container. The biotechnology company Eppendorf obtained the rights to the patent and introduced the micropipette to the rest of the world.

Tips are loaded onto the end of the micropipette by pushing the end of the device into the tip and giving two sharp taps. Press it down completely to remove the tip.

Depress the plunger until you feel resistance. Open the box of micropipette tips, taking care not to touch any of the tips. If you are using a micropipette to load a gel for electrophoresis, place the Use of micropipettes at an angle into 1 end of a well in the gel without allowing it to puncture the gel.

Those instruments used in the food and drug industries are required to be recalibrated every 3 months. You probably would not notice the difference between 10 and 11 microliters in a container, but a difference of less than 1 microliter can be vital to achieving accurate results in microbiological experiments.

Trying to dipense less than the lower value of the range will result in inaccurate measurements. Trying to dispense over the upper range will completely fill the tip and allow liquid to enter the body of the pipette.

Using a micropipette

When delivering smaller volumes into another liquid, you may need to put the end of the tip beneath the surface of the liquid remember to change the tip afterwards if you do this to save contaminating stock. Insert the micropipette into a microcentrifuge tube or other container you want to transfer the liquid to.

Do this carefully, particularly with large volumes, as the liquid may shoot up into the tip and the body of the micropipette. Position 1 is where the pipette is at rest Position 2 is reached by pushing down on the plunger until resistance is met Position 3 is reached by pushing down from position 2 Each of these positions play an important part in the proper use of the pipette.

Sciencing Video Use of micropipettes Turn the knob near the top of the micropipette to adjust it to the volume you need; turn right to increase the volume and left to decrease it.

If delivering into a liquid, remove the tip from the liquid before releasing the plunger Hold the micropipette with the thumb resting on the plunger and the fingers curled around the upper body. Insert the micropipette tip just below the surface of the liquid you are transferring.

Insert the end of the micropipette into a tip and press down firmly, then lift the micropipette. The most commonly used tips are: Micropipettes accurately dispense tiny volumes of liquid -- no more than 1 mL.

Hold the plunger down as you slide the tip up the wall and out of the container. The plunger can sit at any one of three positions: Tip Some micropipettes have 3 "stops" on the plunger and no button to eject tips. Use a microliter micropipette for 2 to 20 microliters, a microliter micropipette for 10 to microliters, and so on.

To dispense liquid Hold the micropipette so that the end of the tip containing tip is inside the vessel you want to deliver it to.Use of Micropipettes Prior to lab you should understand: • The function of micropipettes in the laboratory • Basic parts of micropipette • What volumes are measured with P20, P and P micopipettors • How to read the volume indicator on.

Many modern micropipettes have a digital display in the side of the barrel to indicate the volume amount set by the volume control.

How to Use a Micropipette

A disposable tip is replaced after each use by pressing an ejector button to release the used one. How can the answer be improved?Tell us how.

How to Use a Micropipette Sample Delivery with Variable Automatic Micropipettes: The micropipette is used to transfer small amounts. Some micropipettes deliver fixed volumes, however the majority are adjustable. Each brand uses a slightly different method to do this – Gilsons have an adjustable wheel, others have a locking mechanism and turning the plunger adjusts the volume.

Micropipettes are available in fixed or variable formats in a range of volumes to allow the user to select the correct volume for a particular pipetting application.

What Is a Micropipette Used For? Download
Use of micropipettes
Rated 5/5 based on 79 review